Domoticz中文论坛

在网上查了，没有查到相关方案。
如果能在路由上安装就可以节省一台设备，对于家庭来说还是比较实用的

自己编译或者软路由或者docker
建议不要 折腾的玩意和需要长期稳定运行的设备分开
否则你会发现想省的省不下来反而多很多麻烦

houalibaba 写了： ↑周一 7月 30, 2018 16:44 在网上查了，没有查到相关方案。
如果能在路由上安装就可以节省一台设备，对于家庭来说还是比较实用的

可以是可以,首先得确认路由器空间是不是够大,架构是否直接支持,如果是mips架构的可能要自己编译了.

我也想在OpenWrt上部署Domoticz
看了下：
https://openwrt.org/docs/guide-user/ser ... n/domoticz
一头雾水，没有找到ipk，搞了一晚上了，没有个结果
openwrt目前路由占的比例很大，小米、联想、极路由等等都可以刷，而且很多本身就是openwrt……而且domoticz装到路由上不占地方，不增加设备，省电好维护，优点很多，不过，升级可能会麻烦点。
希望有人弄个教程来照着撸一下

成功安装，显示一切正常，但不能访问8080，打不开web也不知道原因
硬件信息：
主机名 OpenWrt
主机型号 HiWiFi HC5761
架构 MediaTek MT7620A ver:2 eco:6
固件版本 OpenWrt 18.06.1 r7258-5eb055306f / LuCI openwrt-18.06 branch (git-18.228.31946-f64b152)
内核版本 4.14.63
安装过程：
BusyBox v1.28.3 () built-in shell (ash)

_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt 18.06.1, r7258-5eb055306f
-----------------------------------------------------
root@OpenWrt:~# opkg update
Downloading http://openwrt.proxy.ustclug.org/releas ... ramips/mt7 620/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_core
Downloading http://openwrt.proxy.ustclug.org/releas ... ramips/mt7 620/packages/Packages.sig
Signature check passed.
Downloading http://openwrt.proxy.ustclug.org/releas ... /mipsel_24 kc/base/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_base
Downloading http://openwrt.proxy.ustclug.org/releas ... /mipsel_24 kc/base/Packages.sig
Signature check passed.
Downloading http://openwrt.proxy.ustclug.org/releas ... /mipsel_24 kc/luci/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_luci
Downloading http://openwrt.proxy.ustclug.org/releas ... /mipsel_24 kc/luci/Packages.sig
Signature check passed.
Downloading http://openwrt.proxy.ustclug.org/releas ... /mipsel_24 kc/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_packages
Downloading http://openwrt.proxy.ustclug.org/releas ... /mipsel_24 kc/packages/Packages.sig
Signature check passed.
Downloading http://openwrt.proxy.ustclug.org/releas ... /mipsel_24 kc/routing/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_routing
Downloading http://openwrt.proxy.ustclug.org/releas ... /mipsel_24 kc/routing/Packages.sig
Signature check passed.
Downloading http://openwrt.proxy.ustclug.org/releas ... /mipsel_24 kc/telephony/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_telephony
Downloading http://openwrt.proxy.ustclug.org/releas ... /mipsel_24 kc/telephony/Packages.sig
Signature check passed.
root@OpenWrt:~# opkg install vsftpd
Installing vsftpd (3.0.3-2) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... /mipsel_24 kc/packages/vsftpd_3.0.3-2_mipsel_24kc.ipk
Configuring vsftpd.
root@OpenWrt:~# opkg install librt
Package librt (1.1.19-1) installed in root is up to date.
root@OpenWrt:~# opkg install domoticz
Installing domoticz (4.9700-1) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing libstdcpp (7.3.0-1) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing boost (1.68.0-4) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing boost-date_time (1.68.0-4) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing boost-system (1.68.0-4) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing boost-chrono (1.68.0-4) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing boost-atomic (1.68.0-4) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing boost-thread (1.68.0-4) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing libmbedtls (2.12.0-1) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing libcurl (7.60.0-3) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing libcares (1.14.0-1) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing zlib (1.2.11-2) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing libopenssl (1.0.2p-1) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing libmosquitto-ssl (1.5.3-3) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing libmosquittopp (1.5.3-3) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing libopenzwave (1.4.164-2) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Installing libsqlite3 (3230100-1) to root...
Downloading http://openwrt.proxy.ustclug.org/releas ... l_24kc.ipk
Configuring libstdcpp.
Configuring boost-system.
Configuring boost-chrono.
Configuring libmbedtls.
Configuring libcurl.
Configuring libopenzwave.
Configuring boost.
Configuring boost-date_time.
Configuring boost-atomic.
Configuring boost-thread.
Configuring libcares.
Configuring zlib.
Configuring libopenssl.
Configuring libmosquitto-ssl.
Configuring libmosquittopp.
Configuring libsqlite3.
Configuring domoticz.
root@OpenWrt:~#

可能是端囗映射.......

可以参考这位大哥所发表的,LEDE】树莓派上玩LEDE终极指南-66-重量级软件？domoticz
https://blog.csdn.net/wang805447391/art ... s/82492591

我已经在OPENWRT上安装成功