查看“硬件设置”的源代码

__TOC__
在你通过Domoticz控制设备之前，你必须先设置设备与Domoticz之间的通讯方式。进入 设置 -> 硬件 页面添加硬件。在添加相应的硬件之前，设备是不会显示的。<br>
[[file:SetupHardware.png|link=|硬件设置]]
==支持的硬件==
Domoticz最新稳定版本是3.5877，原生支持以下硬件设备。点击设备连接查看更多信息。<br>

目前，开发人员正在开发一个Python插件框架，将允许其它开发人员轻松的在一个硬件（或虚拟硬件）和Domoticz之间创建接口。
如果你是一名开发人员并想做出贡献，请来这里看看:
*[[开发硬件插件]]
*[[开发Python插件]]

下面的列表不是全部设备，有各种各样的方式可以与其他设备交互。强烈建议你查看论坛和Wiki页面。

{| class="wikitable"
| [[1Wire|1-Wire (System)]] || [[Kodi|Kodi Media Server]] || RFXCOM - RFXtrx shared over LAN Interface
|-
| AccuWeather (Weather Lookup) || [[Limitless/AppLamp_LED|Limitless/AppLamp/Mi Light With LAN/WiFi interface]] || RFXCOM - RFXtrx315 USB 315MHz Transceiver
|-
| Atag One Thermostat || [[GPIO|Local I2C sensors]] || RFXCOM - RFXtrx433 USB 433.92MHz Transceiver
|-
| BleBox devices || [[Harmony_Hub|Logitech Harmony Hub]] || RFXCOM - RFXtrx868 USB 868MHz Transceiver
|-
| Comm5 MA-4XXX/MI-XXXX Serial/USB interface || [[Logitech_Media_Server|Logitech Media Server]] || Rainforest RAVEn USB
|-
| Comm5 MA-SXXX with LAN interface || [[MQTT|MQTT Client Gateway with LAN interface]] || [[GPIO|Raspberry's GPIO port]]
|-
| CurrentCost Meter USB || Meteostick USB || [[Zwave|Razberry Z-Wave via LAN interface (HTTP)]]
|-
| CurrentCost Meter with LAN interface || [[X10_devices,_CM15_Pro#Domoticz_.26_Mochad_-_New_style_:_Native_mochad|Mochad CM15Pro/CM19A bridge with LAN interface]] || Rego 6XX USB/serial interface
|-
| [[Daikin_wifi|Daikin Airconditioning with LAN (HTTP) interface]] || Motherboard sensors || [[S0Meter|S0 Meter USB]]
|-
| [[Weather_forecast_from_forecast.io_in_Domoticz|DarkSky (Weather Lookup)]] / Forecast.io || Multifun LAN || [[S0Meter|S0 Meter with LAN Interface]]
|-
| Davis Vantage Weather Station USB || MyHome OpenWebNet || [[SMASpot_Monitoring_in_Domoticz|SBFSpot (SMA)]]
|-
| Denkovi Smartden with LAN interface || [[MySensors|MySensors Gateway USB]] || Satel Integra via LAN Interface
|-
| [[Setting_up_Device_sharing|Domoticz - Remote Server]] || [[MySensors|MySensors Gateway with LAN Interface]] || [[SolarEdge|SolarEdge via LAN interface]]
|-
| Domoticz Internal interface || [[NefitEasy|Nefit Easy HTTP server over LAN Interface]] || [[SolarEdge|SolarEdge via Web API]]
|-
| Dummy (Does nothing, use for virtual switches only) || Nest Thermostat/Protect || SolarMax via LAN Interface
|-
| ETH8020 Relay board with LAN interface || [[Netatmo|Netatmo]] || Sterbox v2-3 PLC With LAN Interface
|-
| [[Eco Devices Via LAN Interface]] || Open Weather Map || System Alive Checker (Ping)
|-
| [[EnOcean|EnOcean USB (ESP2)]] || OpenTherm Gateway USB || TE923 USB Compatible Weather Station
|-
| [[EnOcean|EnOcean USB (ESP3)]] || OpenTherm Gateway with LAN interface || Teleinfo EDF USB
|-
| Energy Count 3000/ NETBSEM4/ La Crosse RT-10 LAN || [[Zwave|OpenZWave USB]] || [[Basic_Tellstick_functionality_with_Domoticz|Tellstick]]
|-
| [[Evohome|Evohome USB (for HGI/S80)]] || P1 Smart Meter USB || Thermosmat Thermostat
|-
| [[Evohome|Evohome via script]] || P1 Smart Meter with LAN interface || [[Toon|Toon Thermostat]]
|-
| Fitbit || [[Domoticz_and_PvOutput.org|PVOutput (Input)]] || [[Voltcraft_CO-20|Volcraft CO-20 USB air qualty sensor]]
|-
| [[Fritzbox|Fritzbox Callmonitor via LAN interface]] || [[Panasonic_TV|Panasonic TV]] || [[Wake-up_On_Lan|Wake-on-LAN]]
|-
| Goodwe solar inverter via Web API || [[Philips_Hue_Lights|Philips Hue Bridge]] || [[Virtual_weather_devices|Weather Underground]]
|-
| HEOS by DENON || [[PiFace|PiFace - Raspberry Pi IO expansion board]] || Winddelen
|-
| HTTP/HTTPS poller || Plugwise Anna Thermostat via LAN interface || [[Yeelight|YeeLight LED]]
|-
| [[Essent|ICY Thermostat]] || RFLink Gateway USB || YouLess Meter with LAN Interface
|-
| KMTromc 433MHz Gateway USB || RFLink Gateway with LAN interface || ZiBlue RFPIayer USB
|-
| KMTromc Gateway USB ||  || ZiBlue RFPlayer with LAN Interface
|-
| KMTromc Gateway with LAN interface ||  || 
|}

==设置USB设备== 
首先确保设备在系统中被识别。 Domoticz会自动识别USB端口。<br>
[[File:AddUSBDevice.png|link=|添加USB设备]]<br>
通过按下 增加 按钮，硬件被添加到系统并将自动启动。<br>

==设置局域网设备== 
首先确保您知道设备的IP地址和端口。<br> 
[[File:AddLANHardware.png|link=|添加局域网设备]]<br>
通过按下 增加 按钮，硬件被添加到系统并将自动启动。<br>

==共享设备== 
你可以向你的朋友共享(Domoticz)传感器。例如，你可以共享你的雨量计，还有可以让其他人控制的灯或开关。为此，您需要在应用程序设置中输入管理员用户名和密码，然后就可以添加用户并为此用户分配传感器或开关。设置共享的具体示例请查看[[设置设备共享]].<br>
要使局域网中的Domoticz服务器可供外部连接，你需要在路由中设置端口转发。请查看你的路由器的文档，了解如何设置转发规则或查看此链接 http://www.howtogeek.com/66214/how-to-forward-ports-on-your-router/ 。

==Domoticz远程服务器== 
为了接收来自其他人的传感器数据，你需要添加一个名叫‘Domoticz – Remote Server’的硬件，然后填写Domoticz远程服务器的IP、端口以及用户名和密码。
==Weather Underground==
一种特殊类型的硬件，可以从世界各地的输钱个气象站接收天气数据(温度、风、降雨、压力、阳光等)。你需要从wunderground.com申请一个个人API Key，免费版API Key可以每天接收500次数据。Domoticz每10分钟请求一次数据，因此每个免费版API Key最多可以连接3个气象站。在API Key中填入你申请的API Key，地址中填入气象站的ID。注意，个人气象站需要在ID前添加pws:字符(例如 pws:INOORDHO68)。如果你需要监测更多气象站，你需要在Wunderground申请额外的API Key。<br>
点击[[虚拟天气设备]]查看有关如何申请和使用此功能的教程。<br>
[[File:WeatherUnderground.png|link=|Weather Underground]]<br>

==Dummy Hardware（虚拟硬件）==
Dummy Hardware是另一个特殊硬件类型。就像它的名字，这种硬件不与外接通讯。它的目的是作为虚拟开关和虚拟传感器的占位符，在事件和脚本中成为一个可变因素（变量）。新的虚拟开关需要在 开关 菜单中，点击 "手动添加 灯/开关" 来添加。新的虚拟传感器从 设置 -> 硬件 中点击相应虚拟硬件中的 创建虚拟传感器 按钮创建。<br>
[[File:DummyHardware.png|link=|Dummy Hardware]]
==硬件列表==
添加硬件后，硬件页面中会列出所添加硬件的概览信息。硬件可以被更新或删除。对于RFXCOM收发器可以通过单击 Set Mode 按钮选择不同的协议。<br>
[[File:HardwareOverview.png|link=|硬件列表]]<br>

==调试硬件==
在Windows系统中，右击右下角托盘中的Domoticz图标，你可以看到一个debug console（调试控制台），或者在Domoticz中选择 设置 -> 日志 打开日志窗口<br>
[[File:LogOption.png|link=|日志选项]]<br>

[[Category:Domoticz]]
[[Category:手册]]
[[Category:安装]]
[[Category:设置]]